Using Shifter at NERSC¶
Shifter is a software package that allows user-created images to run at NERSC. These images can be Docker images or other formats. Using Shifter you can create an image with your desired operating system and easily install your software stacks and dependencies. If you make your image in Docker, it can also be run at any other computing center that is Docker friendly. Shifter also comes with improvements in performance, especially for shared libraries. It is currently the best performing option for python code stacks across multiple nodes. Also, Shifter can leverage its volume mounting capabilities to provide local-disk like functionality and IO performance. Shifter functionality at NERSC is undergoing rapid development and is an experimental service. Usage will change over time, we will do our best to keep the documentation up to date, but there may be inconsistencies. Shifter can be used interacitvely on logins nodes or in a batch job.
Building Shifter Images¶
The easiest way to create a Shifter image is with Docker. You can run Docker on your laptop or local node (see the Docker Getting Started page for help setting up and running Docker). You can create a Docker image with your desired software and operating system.
When you're building images it's better to try to keep the image as compact as possible. This will decrease the time to upload the image to Docker Hub and to upload it into the Shifter framework. Images larger than about 20GB will likely timeout when uploading to Docker Hub. You can keep image size down by removing software source tarballs after you install them and by limiting images to specific target applications and what is needed to support them. Small datasets that are static could go into an image, but it is better to put large datasets on the file system and use Shifter's volume mount capability to mount them into the image.
Once you have built your image, you can upload it to Docker Hub. Once that's done you can pull the image down onto Cori. Alternatively, you can use our private image registry if you do not want to upload your image to a public repository. If your image is too large to comfortably go through Docker Hub or our private repository (> 20GB), please see our support page.
Shifter images have a naming scheme that follows
source:image_name:image_version. Typically the image source will be docker and the image name and version are defined by the user.
Differences Between Shifter and Docker¶
Please keep in mind that root is squashed on Shifter images, so the software should be installed in a way that is executable to someone with user-level permissions. Additionally, images are mounted read-only at NERSC, so software should be configured to output to NERSC file systems, like
$SCRATCH or project.You can test user level access permissions with your docker image by running as a non-root user:
docker run -it --user 500 <image_name> /bin/bash
/var directories are reserved for use by the system and will be overwritten when the image is mounted.
Project must be accessed in a shifter image by using its full path
/global/project/ instead of just
Using MPI in Shifter¶
Shifter has the ability to automatically allow communication between nodes using the high-speed Aries network. Just compile your image against the standard MPICH libraries and the Cray libraries will be swapped into the image at run time. No special compiler arguments are needed. However, this will only work with operating systems with glibc version 2.17 or higher. This includes Ubuntu 15.10 and Scientific Linux / RedHat 7. We are working on MPI support for images with older OSes, but it is not yet available.
Here's an example batch script showing how to run on two nodes:
#!/bin/bash #SBATCH --image=docker:image_name:latest #SBATCH --qos=regular #SBATCH -N 2 srun -n 64 shifter python ~/hello.py
Currently this functionality is only available for images where MPICH is installed manually (i.e. not with
apt-get install mpich-dev). Below is a sample Dockerfile that shows how to build a basic image with
mpi4py in it:
FROM ubuntu:15.10 RUN apt-get update && apt-get install -y autoconf automake gcc g++ make gfortran wget && apt-get clean all RUN mkdir /build/ RUN cd /build && wget https://www.python.org/ftp/python/2.7.13/Python-2.7.13.tgz \ && tar xvzf Python-2.7.13.tgz && cd /build/Python-2.7.13 \ && ./configure && make -j4 && make install && make clean && rm /build/Python-2.7.13.tgz RUN cd /build && wget https://www.mpich.org/static/downloads/3.2/mpich-3.2.tar.gz \ && tar xvzf mpich-3.2.tar.gz && cd /build/mpich-3.2 \ && ./configure && make -j4 && make install && make clean && rm /build/mpich-3.2.tar.gz RUN cd /build && wget https://bitbucket.org/mpi4py/mpi4py/downloads/mpi4py-3.0.0.tar.gz \ && tar xvzf mpi4py-3.0.0.tar.gz RUN cd /build/mpi4py-3.0.0 && python setup.py build && python setup.py install && rm -rf /build/ RUN /sbin/ldconfig
We have observed that programs built with
CMAKE may override the use of the
LD_LIBRARY_PATH. You can use
CMAKE_SKIP_RPATH to disable this behavior. You will need to make sure any libraries installed in the image are in the standard search path. We recommend running an
/sbin/ldconfig as part of the image build (e.g. in the Dockerfile) to update the cache after installing any new libraries in in the image build.
Downloading Shifter Images To NERSC¶
Shifter images can be downloaded from public docker repositories.
shifterimg -v pull docker:image_name:latest
docker:image_name:latest is replaced with some existing and publicly available docker image (like
docker:ubuntu:15.10). The output will update while the image is pulled down and converted so it can run on our systems. Once the "status" field is "READY", the image has been downloaded and can be used.
To see a list of all available images, type:
Shiter can also be used to pull private images. To do this you need to first do a login with shifterimg (similar to a docker login). During the image pull, you can specify which users or groups should have access to the pulled image.
shifterimg login default username: auser default password: shifterimg --user buser pull auser/private:latest 2019-03-21T21:36:05 Pulling Image: docker:auser/private:latest, status: READY
Shifter has functionality that can be toggled on or off using modules flags. By default, the
mpich module is enabled at NERSC which allows communication between nodes using the high-speed interconnect. However, you can override this default by adding the
#SBATCH --module=<module name> flag to your batch script (this flag can also be applied directly to the shifter command, but that's not recommended). Currently, the only allowable values for modules are:
|mpich||Allows communication between nodes using the high-speed interconnect|
|mpich-cle6||Uses older CLE6 MPI libraries (needed for some images with older OSes)|
|cvmfs||Makes access to DVS shared CVMFS software stack available at /cvmfs in the image|
|none||Turns off all modules|
If you're encountering glibc errors when you try to run MPI in your shifter image, running with the
mpich-cle6 module enabled may fix the issue. However, these older mpich libraries may not be retained during the next upgrade, so ultimately we recommend you remake your image with a newer OS.
Modules can be used together. So if you wanted MPI functionality and access to cvmfs, use
#SBATCH --module=mpich,cvmfs. Using the flag
none will disable all modules (even if you list others in the command line).
Running Jobs in Shifter Images¶
For each of the examples below, you can submit them to the batch system with
Basic Job Script¶
Here's the syntax for a basic Shifter script:
#!/bin/bash #SBATCH --image=docker:image_name:latest #SBATCH --nodes=1 #SBATCH --qos=regular srun -n 32 shifter python myPythonScript.py args
This will invoke 32 instances of your image and run the
myPythonScript.py in each one. If you are running in the jgi qos, you will need to add
#SBATCH --exclusive for spark to work.
For serial jobs (aka shared or single-node jobs), you can leave off the srun since it runs on a single core by default:
#!/bin/bash #SBATCH --image=docker:image_name:latest #SBATCH --qos=shared shifter python myPythonScript.py args
Interactive Shifter Jobs¶
Sometimes it may be helpful during debugging to run a Shifter image interactively. You can do this on any Cori login node or via the batch system. To get an interactive session on a login node use
shifter --image=docker:image_name:latest /bin/bash
salloc -N 1 -p debug --image=docker:image_name:latest -t 00:30:00 shifter /bin/bash
Please note that for these examples to work you must have bash installed in your image.
Multiple Shifter Images in a Single Job¶
You can also run several different Shifter images inside of a single job. The script below starts two images. The first runs only once and uses the workflow_manager image. Inside this image it runs a lightweight manager program that mostly sleeps and occasionally monitors the other jobs. The second image runs 4096 times (on 32 cores for 128 nodes) and uses the workflow image. It runs the worker.sh script that checks in with the workflow manager and runs the heavy workload. The second image also binds a directory in Cori's Lustre scratch file system to a predefined directory inside the image.
#!/bin/bash #SBATCH --image=docker:workflow:latest #SBATCH -N 128 #SBATCH -p regular tasks = $(( 128 * 32 )) srun -N 1 -n 1 shifter --image=docker:workflow_manager:latest workflow_man.sh & srun -N 128 -n $tasks shifter --volume=$SCRATCH/path/to/my/data:/data/in worker.sh
Volume Mounting in Shifter¶
Existing directories can be mounted inside a Shifter image using a
--volume directory_to_be_mounted:targer_directory_in_image flag. This allows you to potentially run an image at multiple sites and direct the output to the best file system without modifying the code in the image. This option can be used on the shifter command-line or in an
#SBATCH-directive. When specifying a volume mount in a batch submission using an
#SBATCH-directive, you must avoid using environment variables such as
$SCRATCH since they will not be resolved. For example, you might want to mount your scratch directory into a directory called output in your Shifter image. You can do this with a batch directive by including the line:
To do multiple volume mounts, separate the mounts with a semi-colon. Also, note that project mounts should include /global in the beginning of the path. Here is an example that mounts the same project space in two locations inside the container:
Temporary Xfs Files for Optimizing IO¶
Shifter also has the ability to create temporary xfs files for each node. These files are created on the Lustre file system, but because all of the metadata operations are taking place on a single node the IO is very fast. This is a good place to put temporary output, just remember to copy anything you want to keep to a permanent home at the end of the job. Users have also had success storing small databases that will be accessed frequently in these temporary directories. You can request the temporary files be created by adding this flag to your batch script:
This will create a xfs file with a 200 GB capacity for every node in the job and mount it at
/tmp in the image.
If your job is frequently accessing many temporary files that are local to the node, you may find better performance writing these files to the xfs file.
Using NERSC's Private Registry¶
NERSC runs a private registry that can be used to store images that may include proprietary software or other files that users may not wish to store in a public registry like DockerHub. This is an authenticated registry so users must login with the NERSC username and password in order to access the registry and images can be marked public to limit access. Users can use a special version of the shifterimg tool to pull the images into Shifter and limit access. Here are the basic steps to using the registry.
Using a web browser, log into https://registry.services.nersc.gov. Use your NERSC username and password to authenticate.
Click on your username in the upper right corner and select "Create new token" in the application tokens section. It will prompt you for a name, this is used to identify the token if you need to remove it later. Give it a meaningful name (e.g. shifter2018). A string will be shown towards the top of the page, save that string for later use. It will only be shown this once, so record it in a secure place. You will use this password in lieu of your regular NERSC password when interacting with the registry to avoid storing your NERSC password in your Docker keyfile or Shifter credential store.
On your Docker system (e.g. laptop or workstation), user the docker tool to log into the NERSC registry. When prompted, enter your regular username and the application password generated above. You should only have to do this once on a given Docker system.
docker login registry.services.nersc.gov
Build or tag an image prefacing the NERSC registry in the tag name.
docker build -t registry.services.nersc.gov/<NERSC username>/<my image name>:latest . # or docker tag <imageid> registry.services.nersc.gov/<NERSC username>/<my image name>:latest
Push the image that was tagged:
docker push registry.services.nersc.gov/<NERSC username>/<my image name>:latest
The image should now be available in the NERSC registry. To use the image in Shifter, use the shifterimg command to login and pull the image. Again, use the Application token generated above for the password not your regular NERSC password.
# shifterimg login registry.services.nersc.gov registry.services.nersc.gov username: <NERSC username> registry.services.nersc.gov password: <Application Token> # shifterimg pull registry.services.nersc.gov/<NERSC username>/myimage:latest